Kneeler Bracket (Atwood-Hamlin)
Kneeler Replacement PartsThe steel side brackets that attach the kneeler to the pew and carry the pivot stud and rubber-stop stud. Sold in pairs (left + right mirror). Atwood-Hamlin's Arm 4 pivots 3½" off the floor; Arm 5 pivots 2" off the floor — Arms 4 and 5 are the most common types. Supplied by Atwood-Hamlin Mfg. Co, Inc. (800-545-8964 · sales@atwood-hamlin.com). The STLs below are reference geometry only; order the steel originals from Atwood-Hamlin.
Assembly Guide
- Identify your bracket number (4 or 5) by measuring the pivot height from the floor — 3½" is Arm 4, 2" is Arm 5.
- Remove the old bracket by unscrewing the two mounting screws from the kneeler frame.
- Align the new bracket and drive the mounting screws supplied with it.
- Reinstall the kneeler bushing, spacer, pivot bolt, and bumper before re-hanging the kneeler.
- Contact Atwood-Hamlin directly if unsure which bracket number you need: 800-545-8964 or sales@atwood-hamlin.com
Downloads
Left Bracket (reference)
Right Bracket (reference)